Skip to articles
Gun Insights
November 18, 2026ReviewsBy Gun Insights

Inglis L9A1 Review: The Forged-Steel Hi-Power Just Hit $399.99

The Turkish-built Inglis L9A1 Hi-Power clone is down to $399.99. Specs, trigger numbers and what reviewers and owners report.

Inglis L9A1 9mm Hi-Power pistol

The Browning Hi-Power served in more armies than almost any pistol in history, and for years the only way to own one was to pay collector money for a used FN or Browning. The Inglis L9A1 changes that math. It's a forged-steel reproduction of the British service pattern, and AmmoLand reports it is currently $399.99 at Palmetto State Armory, down from a regular $529.99.

At that price the question isn't whether a Hi-Power is still relevant. It's whether this one is good enough to buy and actually shoot. Between the manufacturer's spec sheet, hrfunk's detailed hands-on review and owner feedback, there's enough evidence to answer that.

Latest prices for Inglis L9A1

StorePriceDeal
The Real Grit$464.95View Deal
BattleHawk Armory$477.00View Deal
Scorpius Tactical$507.99View Deal
Schaefer Defense$514.00View Deal
Black Bayou Armory$516.09View Deal

Prices as of November 18, 2026 and may have changed.

Search more

What It Is

L9A1 was the British military designation for the Hi-Power, the 9mm pistol that replaced the Enfield revolver and stayed in service until the Glock 17 took over in 2013. SDS Arms revived the historic Inglis name, originally the Canadian wartime maker of the Hi-Power, for a line of P-35-pattern pistols that are manufactured in Türkiye.

hrfunk makes an important point in his review: despite the wartime branding, this pistol is closer in detail to a late Mark III Hi-Power than to a WWII gun. It has an external extractor, three-bar sights, an extended ambidextrous safety and black checkered plastic grips. Put it next to his circa-1990 Browning Mark III and, he says, you'd struggle to tell them apart from across the room, apart from the ring hammer and lanyard loop.

Specs at a Glance

ModelInglis L9A1 (SKU 12000000)
Caliber9mm Luger
Capacity15+1 (two magazines included)
ActionSingle-action, tilting barrel
Barrel4.7 in., 1:10 twist, recessed crown
Frame and slideForged 4140 steel
FinishBlack Cerakote (retailers list it as black chromate)
SightsThree-bar, Browning-pattern dovetails
SafetyExtended ambidextrous thumb safety; no magazine disconnect
GripsCheckered military-style polymer
Trigger pullAbout 7 lb (6 lb 10 oz to 7 lb 1 oz measured by hrfunk)
In the boxLockable hard case, two magazines, cleaning kit, manual
Warranty1-year warranty and lifetime service plan

The Big Change: No Magazine Disconnect

Original Hi-Powers have a magazine disconnect safety, a feature the French military asked for in the 1920s that stayed in the design for some 70 years. It prevents the pistol from firing without a magazine, and it's widely blamed for gritty triggers and magazines that won't drop free.

Inglis left it out. That's the single most shooter-friendly decision on this pistol, and it's one that many Hi-Power owners pay a gunsmith to make on their originals.

Controls & Ergonomics

The Hi-Power's grip is the reason people still love it: slim for a double-stack, with a shape that seems to fit nearly every hand. The L9A1 keeps that, along with rear-only slide serrations and a left-side magazine release.

hrfunk flags two period quirks. First, ring hammers can bite the web of the hand on some shooters. Second, the slide stop's shape means a modern thumbs-forward grip can bump it and lock the slide open with rounds still in the magazine. Neither is a defect in this particular gun; they come with the design.

A nice touch he didn't expect: the barrel has a recessed crown to protect the rifling, something he hadn't seen on a Hi-Power before. And because the sight dovetails are cut to Browning dimensions, aftermarket Hi-Power sights should fit if the three-bar set isn't to your taste.

Trigger

Hi-Powers have never been known for great triggers, and the gauge agrees. hrfunk's three pulls measured 6 pounds 12 ounces, 7 pounds 1 ounce and 6 pounds 10 ounces, right at the roughly 7 pounds Inglis quotes. He added that it doesn't feel that heavy in the hand, with a fairly clean break and the typical longish Hi-Power reset. It's a service trigger, not a target trigger.

What Reviewers and Owners Found

hrfunk's full review covers the pistol's history, a side-by-side with his Browning, and a winter range session in Ohio:

On finish, he found the Cerakote slightly rougher-looking than the epoxy on his Browning but evenly applied and likely more durable. That's the appeal in a sentence: a real Browning Mark III now sells for north of $1,000 and loses value with every scratch, while the Inglis can be carried, shot and scuffed without regret.

AmmoLand's write-up says independent testing has shown reliable function over hundreds of rounds and practical accuracy on steel at 25 yards. Owner feedback on SDS Arms' own product page is more mixed, and it's worth being honest about that. One buyer reports 200 flawless rounds across 115-, 124- and 147-grain loads, including hollow points. Another reports regular failures to eject and occasional premature slide lock, and regrets not sending the pistol back for service. Quality control on budget imports can vary, so test yours thoroughly while the warranty clock is running.

Price & Availability

As of AmmoLand's November 16 report, Palmetto State Armory has the L9A1 at $399.99 against a regular price of $529.99, a limited-time deal. AmmoLand puts MSRP at roughly $489 to $558. Inglis also offers other P-35 variants that differ mainly in finish.

If you're cross-shopping Turkish Hi-Power clones, our EAA Girsan MCP 35 PI LW review covers a lighter, more modernized take on the same design.

Who It's For

The L9A1 is for the shooter who has always wanted a Hi-Power and doesn't want to risk a collectible, for military history fans who want the British-pattern look with the lanyard loop and ring hammer, and for anyone who prefers an all-steel single-action 9mm to a polymer striker gun. If you want an optics cut, a rail or a light trigger, this isn't your pistol.

Pros & Cons

Pros

  • Forged 4140 steel frame and slide at a sale price of $399.99
  • No magazine disconnect, so magazines drop free
  • 15-round magazines, two included, versus the original's 13
  • Browning-pattern sight dovetails for easy upgrades
  • Ambidextrous safety and a recessed barrel crown

Cons

  • Trigger pull of about 7 pounds
  • Mixed owner reports on reliability
  • Ring hammer and slide stop can cause trouble with some grips
  • Not a true WWII-pattern reproduction, despite the branding

Verdict

The Inglis L9A1 is the most affordable way to get the Hi-Power experience in forged steel, and deleting the magazine disconnect makes it a better shooter than many originals. Go in knowing the trigger is heavy and that a few owners have had teething problems. At $399.99, though, it's hard to think of another all-steel classic that offers this much history per dollar.


Do you own a Hi-Power, original or clone? Would the missing magazine disconnect push you toward the Inglis?

Learn more about our editorial process and how we test.

Related Articles